Manufacturer of Turbine Components
Manufactures various types of steam turbines ranging from 5MW - 50MW,including condensing, backpressure, and extraction-condensing designs
C560
The C560 steam turbine is a multi-stage condensing turbine with a single-deck configuration and a main shaft speed of 5600-6500 rpm.
Category:
Industrial drag turbine
key word:
Product Description
The C560 steam turbine is a multi-stage condensing turbine with a single-deck configuration and a main shaft speed of 5600-6500 rpm. The T560 is a condensing turbine unit suitable for waste heat power generation ranging from 750 to 4000 kW, utilizing either superheated fresh steam or saturated steam with a minimum pressure of just 0.45 MPa. Exhaust steam is condensed into water within the system's integrated condenser. Primarily applied in waste heat recovery and power generation utilizing residual heat in industries such as chemicals and sulfuric acid production, it has developed standard series products including 1.5MW, 2.2MW, 3MW, and 4.0MW pure low-temperature waste heat power generation steam turbines. These can now meet the waste heat power generation requirements of enterprises rich in waste heat steam. The equipment features lower operating costs and more significant economic benefits.
Structural Features
● Structure: Quick-mount double-pivot impulse multi-stage condensing steam turbine
● Layout: Single-deck or multi-deck
● Mechanical Speed Control: Fully hydraulic speed control
● Electronic Speed Control: Utilizes American WOODWARD 505 Digital Speed Governor + German VIOTH Electro-Hydraulic Converter or DEH
● Overspeed Protection: Dual mechanical fly-hammer type with electromagnetic valve electronic intelligent control
● Steam Seal Type: Stainless steel plate labyrinth steam seal, honeycomb contact steam seal
● Main Steam Valve: Integrated automatic main steam valve (combination regulating valve)
● Main shaft assembly: Compound-speed impeller blades, interference fit between rotor and impeller, impeller blades with embedded installation
● Lubrication system: Forced oil lubrication with thin oil station and cooler
● Thermal expansion compensation: Sliding thermal compensation for front bearing support
● Electrical configuration: Complete set of electrical control cabinets, protection cabinets, main control cabinets, and matching generator (voltage 400-10050V)
Product Specifications
| Product Model | Rated Power | Rotational Speed | Steam Pressure | Steam Inlet Temperature | Exhaust Pressure | Fuel Consumption Rate |
C562 | N0.75-2.35 | 750 | 6500 | 2.35 | 390 | 0.0080 | 5.97 |
N0.75-3.43 | 750 | 6500 | 3.43 | 435 | 0.0090 | 5.35 | |
N1.8-3.43 | 1800 | 6500 | 3.43 | 435 | 0.0090 | 5.77 | |
N1.5-1.27 | 1500 | 6500 | 1.27 | 340 | 0.0090 | 6.4 | |
N1.5-1.27 | 1500 | 6500 | 1.27 | 360 | 0.0350 | 7.7 | |
N1.5-2.35 | 1500 | 6500 | 2.35 | 390 | 0.0073 | 5.57 | |
N1.5-2.35 | 1500 | 6500 | 2.35 | 390 | 0.0080 | 5.67 | |
C563 | N3-2.35 | 3000 | 5600 | 2.35 | 390 | 0.0080 | 5.54 |
N3-1.7 | 3000 | 5600 | 1.7 | 300 | 0.0080 | 4.83 | |
N3-2.35 | 3000 | 5600 | 2.35 | 390 | 0.0080 | 5.54 | |
N3-3.43 | 3000 | 5600 | 3.43 | 435 | 0.0080 | 5.08 | |
N3-2.35 | 3000 | 5600 | 2.35 | 390 | 0.0080 | 5.3 | |
Note: Inlet and exhaust steam pressures are absolute pressures. Turbine body weight: 7 tons. Dimensions: 3650mm × 2590mm × 2130mm. | |||||||
Schematic Diagram
Serial Number | Part Name | Serial Number | Part Name |
1 | Oil Tank Base | 20 | Third Stage Impeller Blades |
2 | Front Bearing Housing | 21 | Fourth Stage Divider |
3 | Main Oil Pump | 22 | Fourth Stage Impeller Blades |
4 | B100 Electro-Hydraulic Actuator | 23 | Fifth Stage Divider |
5 | Emergency Shutdown Switch | 24 | Fifth Stage Turbine Blades |
6 | Thrust Bearing Front Bearing | 25 | Baffle Steam Seal |
7 | Front Steam Seal | 26 | Sixth Stage Baffle |
8 | Front Steam Outlet Pipe | 27 | Sixth Stage Turbine Blades |
9 | Turbine Casing | 28 | Seventh Stage Baffle |
10 | Regulating Steam Valve and Connecting Rod | 29 | Seventh Stage Turbine Blades |
11 | Front Cylinder | 30 | Rear Steam Seal |
12 | Nozzle Assembly | 31 | Rear Steam Outlet Pipe |
13 | Guide Vanes Ring | 32 | Rear Cylinder |
14 | Recompression Stage Impeller Blades | 33 | Turbine Rear Bearing |
15 | First Stage Divider | 34 | Main Shaft Assembly |
16 | First Stage Impeller Blades | 35 | Turbine End Coupling |
17 | Second Stage Divider | 36 | Turbine End Coupling Housing |
18 | Second Stage Impeller Blades | 37 | Gearbox |
19 | Third Stage Divider |
|
|
Get ln Touch Now
Need Assistance? We're Here To Help!
Previous page
Next page
We are here to serve you.
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry
Plant equipment
Need Assistance? We're Here To Help!
Enter your information and our team will reach out to you shortly.
Other products
A production-oriented enterprise specializing in the processing, production, and research and development of steam turbine components